Advertisement
• Align the position marks "▼" on the
body and " " on the cover to place it
on the cover. Rotate the motor body
clockwise until a locking sound is
heard. In this case, the "▼" position
mark on the body will align with the " "
position mark on the cover.
WARNING: Your appliance will not
operate until the processer container's
lockable cover and/or the motor body
are fully seated and locked into their
places.
• Plug in the appliance.
• You may start the grating or slicing
process by pressing the operation
button on the motor body. Do not
operate the appliance in turbo mode
when performing grating or slicing
processes.
• To remove the motor body
apply the steps explained on page
4.
BKK 2166_EN.indd 8
• For your safety, feed the food into
the container with its pusher; pushers
must be in their place when the
appliance is operating. There are two
types of pushers according to the
thickness of the food: big and small.
You may select the pusher according
to the piece you will put. Never use
your fingers, fork, spoon and tools
alike instead of a pusher.
When grating process is over, it
is recommended that the disc be
operated as to rotate for several cycles
more to grate the smaller items that
might have remained between the
carrier disc and the cover.
Grating and slicing recommendations
are given in the table on page 9.
8
EN
01.06.2011 10:17
Advertisement
