2-64 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
Turn the locknut [A] counterclockwise until it contacts with
the sealing bolt [B].
With the locknut held immovable using a wrench [C],
tighten the sealing bolt to the specified torque.
Torque - Sealing Bolt (to Piston Rod): 28 N·m (2.9 kgf·m, 21
When tightening the locknut, the threads of the axle
holder do not touch the piston rod. If the piston
rod is scratched, it is possible to the damage in the
Apply a non-permanent locking agent to the threads of the
sealing bolt [A] and tighten the sealing bolt into the front
Torque - Sealing Bolt (to Axle Holder): 69 N·m (7.0 kgf·m,
Remove the cylinder unit [A] from the outer tube [B] using
the top plug wrench [C].
Special Tool - Top Plug Wrench, 50 mm: 57001-1645
Pour the fork oil [A] of 270 mL (9.13 US oz.) into the outer
Suspension Oil - SS-19 (1 L): 44091-0009