16-8 ELECTRICAL SYSTEM
There are numbers of important precautions that are
musts when servicing electrical systems. Learn and ob-
serve all the rules below.
The electrical parts should never be struck sharply, as
with a hammer, or allowed to fall on a hard surface. Such
a shock to the parts can damage them.
To prevent damage to electrical parts, do not disconnect
any electrical connections while the engine is running.
Troubles may involve one or in some cases all items.
Never replace a defective part without determining what
CAUSED the failure. If the failure was caused by some
other item or items, they too must be repaired or replaced,
or the new replacement will soon fail again.
Make sure all connectors in the circuit are clean and tight,
and examine leads for signs of burning, fraying, etc. Poor
leads and bad connections will affect electrical system
Measure coil and winding resistance when the part is cold
(at room temperature).