For the right footpeg removal, remove the brake pedal
assy (see Right Engine Cover Removal in the Clutch
Cotter Pin [A]
Pivot Pin [C]
Footpeg Bracket Bolt [F]
Footpeg Bracket [G]
The footpeg can be adjusted in two positions, refer to
the Footpeg Height Adjustment.
Replace the cotter pin [A] with a new one.
Apply a non-permanent locking agent to the footpeg
bracket bolts [B].
Install the footpeg bracket [C], and tighten the bolts.
Torque - Footpeg Bracket Bolt (Upper): 35 N·m (3.6 kgf·m,
Footpeg Bracket Bolt (Lower): 17 N·m (1.7 kgf·m,
Apply grease to the pivot pin [D].
Install the footpeg [E], spring [F] and pivot pin.
Insert the pivot pin from upper side.
Install the washer [G] and cotter pin.
Bend the longer side [A] of the cotter pin as shown.