Rear Shock Absorber
Oil Seal [A]
To avoid damage to the surfaces of the oil seal as-
sembly body [B], cover the screwdriver [C] with the
Damper Holder [C]
Inspect the piston rod sliding surface [A].
If the sliding surface is scratches or distortion, replace it.
Hold the lower of the piston rod assembly in a vise with
soft jaws or heavy cloth.
Make the threads of the piston rod end using the die [A].
12 × 1.25 mm
Clean all parts with solvent and dry them with compressed
Rear Shock Absorber Assembly
Damper Holder [A]