Engine Sprocket Removal
Engine Sprocket Cover Bolts [A]
Engine Sprocket Cover [B]
Drive Chain Guide [C]
Flatten the bended sprocket washer [A].
Engine Sprocket Nut [B]
Remove the engine sprocket [C] from the drive chain [D].
Engine Sprocket Installation
Install the engine sprocket so that the stepped side [A]
Replace the sprocket washer with a new one.
Install the sprocket washer and sprocket nut.
Torque - Engine Sprocket Nut: 70 N·m (7.1 kgf·m, 52 ft·lb)
Bend the one side of the sprocket washer on the nut.
Install the drive chain guide and engine sprocket cover.
Torque - Engine Sprocket Cover Bolts : 5.0 N·m (0.51
kgf·m, 44 in·lb)
Rear Sprocket Removal
Remove the rear wheel (see Rear Wheel Removal in the
Do not lay the wheel on the ground with the disc
facing down. This can damage or warp the disc.
Place blocks under the wheel so that the disc does
not touch the ground.
Rear Sprocket Bolts [A] and Nuts
Rear Sprocket [B]
FINAL DRIVE 11-7