Drain the engine oil (see Engine Oil Change in the Peri-
odic Maintenance chapter).
Clutch Cover (see Clutch Cover Removal)
Clutch Spring Bolts [A]
Clutch Spring Plate [B]
Needle Bearing [B]
Push Rod Holder [C]
Push Rod [D]
Friction Plates [A]
Steel Plates [B]
There are 2 different friction plates installed in the clutch
When servicing the clutch, use a permanent marker to
identify each friction plate before removing them so that
they can be reinstalled in the correct positions.
Hold the clutch hub [A] with the clutch holder [B].
Special Tool - Clutch Holder: 57001-1243
Remove the clutch hub nut [C].
Clutch Hub [B]