Install the exhaust pipe and muffler body temporary.
Align the slit [A] of the muffler clamp with the projection of
the muffler body.
Viewed from behind [B]
Face the muffler clamp bolt [C] upward.
First, temporarily tighten the exhaust pipe holder nuts [D],
and then temporarily tighten the muffler mounting bolt
Second, tighten the muffler mounting bolt (front) [F], and
then tighten the muffler mounting bolt (rear).
Torque - Muffler Mounting Bolts: 21 N·m (2.1 kgf·m, 15 ft·lb)
Third, tighten the exhaust pipe holder nuts.
Torque - Exhaust Pipe Holder Nuts: 15 N·m (1.5 kgf·m, 11
Lastly, tighten the muffler clamp bolt.
Torque - Muffler Clamp Bolt: 11 N·m (1.1 kgf·m, 97 in·lb)
Thoroughly warm up the engine, wait until the engine
cools down, and then retighten all the bolts and nuts.
Silencer Wool Replacement
Refer to the Silencer Wool Replacement in the Periodic
ENGINE TOP END 5-41