Clear the breather hose [A].
Remove (Both Sides):
Upper Engine Bracket [A] (see Engine Removal in the
Engine Removal/Installation chapter)
Cylinder Head Bolts (M6) [B]
Cylinder Bolt [D]
Throttle Body Assy Clamp Bolt [E]
Slide the clamp [A] and disconnect the water hose [B].
Remove the cylinder head bolts (M10) [A].
Remove the cylinder head [A] while pulling the throttle
body assy off the throttle body assy holder.
When do not remove the cylinder head easily, tap lightly
up with a plastic mallet [B] to separate the cylinder head
from the cylinder.
ENGINE TOP END 5-23