Ef6: Control Reset; Ef9: Hot Valve Warning - Electrolux EFLS617SIW Technical & Service Manual

Troubleshooting Based on Error Codes
EF6

EF6: Control Reset

Checks to perform:
Check wiring to main board. Unplug the unit for 1 minute and retry. If problem is not corrected replace Main

EF9: Hot Valve Warning

EF9
Hot and Cold Hose reversed.
Checks to perform:
Check for the water supply line. Is the continuity flow
of water is there?
Check if the Hot and Cold water hoses are
connecting to their respective Hot and Cold Valve?
Is the temperature of Hot water same as the Cold
Fix the Hot water in the house supply.
Y
E
S
Y
E
S
water?
Y
E
S
WARNING
Check that all the connectors are correctly
inserted.
Control Board.
WARNING
Check that all the connectors are correctly
inserted.
Check for the water supply line, power
NO
connection and repeat the diagnostic cycle to
Switch back the Cold and Hot water hoses to
their correct position and repeat the diagnostic
NO
cycle to check for any further errors.
Check for Main Control Board and repeat the
NO
diagnostic cycle to check for any further errors.
58
check for any further errors.
EF6
EF9