Setting A Timer - Optimus 112 (16-549) Owner's Manual

16-549.fm Page 30 Tuesday, July 20, 1999 5:04 PM

Setting a Timer

Note: If you use a TV/monitor that is connected
to the VCR's
AUDIO/VIDEO OUT
TV/monitor to the video mode and skip Steps 2
and 3.
1. Turn on the VCR and the TV.
2. Set the TV to the same channel as
on the back of the VCR.
3. Repeatedly press
appears.
4. (Model 62 only) Set the audio recording
mode to the desired setting. See "Receiv-
ing/Recording Stereo/SAP
(Model 62 Only)" on Page 28.
5. Load a blank cassette, or one that you
want to record over, into the VCR.
6. Press on the remote control. The timer
PROG
setting menu appears on the TV screen.
STOP
2:00P 125
TE
Y
Or, if you have already entered timer set-
tings, the current settings for up to the first
four broadcasts appear.
STOP
2 : 00 A 08
Note: If the clock is not set,
CLOCK BEFORE PROGRAMMING
pears, then the clock setting screen ap-
pears. Set the clock as described in "Manu-
ally Setting the Clock" on Page 16.
30
jacks, set the
3-CH-4
until VCR
TV/VCR
Broadcasts
CH
SLP
CH SPD
SP
PLEASE SET
ap-
7. Repeatedly press
PLAY
an empty timer number, then press
This menu appears.
DATE START STOP
8 SAT --:-- --:-- --
TODAY
SELE CT START DATE
SELECT : KEY
SET : KEY
END : PROG KEY
8. Repeatedly press
PLAY
the date when you want to record.
To record a broadcast at the same time on
the same day every week , press either but-
ton until WEEKLY flashes and the desired
day of the week appears.
DATE START STOP
WEEKLY --:-- --:-- --
SUN
SELE CT START DATE
SELECT : KEY
SET : KEY
END : PROG KEY
To record a broadcast at the same time
Monday through Friday , press either button
until DAILY flashes
appears.
DATE START STOP
DAILY --:-- --:-- --
MON-FRI
SELE CT START DATE
SELECT : KEY
SET : KEY
END : PROG KEY
To record a broadcast at a set time today ,
press either button until today's date
flashes and TODAY appears.
or to select
STOP
.
FAST-F
CH
EP
or to select
STOP
CH
EP
and MON-FRI
CH
EP