Getting To Know Your Phone - AEG SOLO 10 Quick Start Manual

3
3.3 Handset & Base Connection
• When purchased, all handsets are already registered to the base unit and should link to it when they are
all powered up.
• To use your cordless handset and base unit together, you must be able to establish a radio link between
them. The signal between the handset and the base unit is in accordance with the normal standards for
a DECT phone: Maximum range up to 300 metres outdoors or 50 metres indoors. Be aware that:
> Large metal objects, such as refrigerators, mirrors or filing cabinets, between the handset and the base
unit may block the radio signal.
> Solid structures, such as walls, may reduce the signal strength.
> Electrical equipment may cause interference and/or affect the range.
• Do not place the base unit close to another telephone, TV or audio equipment - it may cause interference.
• Putting the base unit as high as possible ensures the best signal.
• Out of Range warning. If you hear a warning tone during a call, and/or the sound in the earpiece
becomes faint or distorted, you may be going out of range of the base unit. Move nearer to the base
unit within 20 seconds; otherwise the line may be cut off.
4

GETTING TO KNOW YOUR PHONE

4.1 Handset Overview (See P1)
# Icon
In standby mode, press to enter the Main Menu list.
1
Press to select an item, or to save an entry or setting.
In menu mode, press to scroll up.
2 During a call or message playback, press to increase the volume.
In standby mode, press to access the call log.
Press to make or answer a call.
3 During a call or message playback, press to switch between speakerphone and
earpiece.
Press and hold to switch the key lock on or off
4
5 During a call, press to send a Flash signal for network services.
6 In standby mode, press to access the redial list.
7 In standby mode or during a call, press to initiate an intercom call or transfer a call.
Press to cancel an action.
During pre-dialling, press to delete the last digit entered.
8
During a call, press to mute the microphone, and press again to resume
conversation.
In menu mode, press to scroll down.
9 During a call, or message playback, press to decrease the volume.
In standby mode, press to access the phonebook list.
During a call, press to hang up.
10 During programming, press to cancel and exit without making changes.
In standby mode, press and hold to power the handset on/off.
Press and hold to turn the handset ringer off.
11 Press and hold to add a dialling pause when dialling or entering numbers into the
phonebook.
Meaning