3-2
Mechanical and Dismantling Instructions
Detailed information please refer to the model set.
Dismantling Instruction
,
:Dismantle Front Panel, disconnect the connectors (XP6, XP605 XP8), need release 2 snaps of Front Panel & 2 snaps
Step3
of bottom cabinet , then gently pull the Panel out from the set. (Figure 3)
Figure 3
Step4
: Dismantle Front Control Board,remove 5 screws (Figure 4
)
Figure 4
: Dismantle Loader, disconnect the 3 connectors (XP7, XP10,XP5 ) aiming in the below figure, and remove 2 screws
Step5
that connects the loader and the bottom cabinet. (Figure 5)
Figure 5