H-Error Indication - Panasonic NA-F135X1 Service Manual

12.2 H-Error indication

● If there is an operation error or if there is a problem with the washing machine,
- All the switchs cannot be operated.
- An error indication will be displayed.
Indication
Content
Water level sensor
H01 error
Motor triac error
H02
Load relay short
H04
error
The memory circuit
H05
of IC error
Safety switch
H12
connection error
Thermistor error
H17
(for X series)
Overflow error
H21
Check Point
●Check at condition of the connector
●Replace the Pressure sensor switch
●Replace PCB board
●In water drain action check both side of
capacitor that voltage not equal to "0" V.
●Replace PCB board
●After turn on the Motor for 2 seconds,
capacitor voltage is not "0"
●Replace PCB board
●Replace Safety switch
●Replace PCB board
●Check Feed valve and PCB
●Replace Feed valve
- 17 -
Method to clear
●Disconnect the power
plug--->plug in
●Disconnect the power
plug--->plug in
●Change Capacitor
●Disconnect the power
plug--->plug in
●Disconnect the power
plug--->plug in
●Disconnect the power
plug--->plug in
●Disconnect the power
plug--->plug in