Programming For Tv; Programmation Pour Téléviseur - RCA CRCU805MSL Manual

Table of Contents

Advertisement

Programming For TV

Most RCA, GE and ProScan TVs will not require
programming. Check to see if your TV responds to
the remote before you begin programming.
1.
Manually turn on the TV.
Find the three digit code for your
TV in the code list below.
2.
Press and hold the CODE
SEARCH button until
the INDICATOR LIGHT lights,
then release the CODE SEARCH
button.
3.
Press and release the TV button
(The INDICATOR LIGHT will
blink then remain lit).
4.
Enter the code using the Number
Buttons.
After your code is entered, the
INDICATOR LIGHT will
turn off. If the code is not valid,
the INDICATOR LIGHT will
blink. Check the code list and
repeat process.
5.
Aim the remote at your TV and
press the ON•OFF button. Your
TV should turn off.
Note: If your TV does not respond, try all the
codes for your brand. If the codes do not work,
or your brand is not listed, try the Code Search
method on page 19.
6.
With your TV on, press CH+
(CHANNEL UP) If the TV
responds, no further
programming is required.
7.
Enter your code here for easy
reference.
TV Code List / Liste de codes de téléviseur
4
Programmation pour téléviseur
La plupart des téléviseurs RCA, GE et ProScan
n'exigent aucune programmation. Vérifiez si le
téléviseur réagit à la télécommande avant de
programmer.
INDICATOR LIGHT /
VOYANT
(BLINK)
(CLIGNOTEMENT)
(OFF)
(ÉTEINT)
TV CODE
CODE DE
TÉLÉVISEUR
1.
Allumez le téléviseur
manuellement. Trouvez le code à
trois chiffres du téléviseur dans
la liste de codes ci-dessous.
2.
Maintenez la touche CODE
SEARCH enfoncée jusqu'à ce
que le VOYANT s'allume, puis
relâchez la touche CODE
SEARCH.
3.
Appuyez sur la touche TV (le
VOYANT clignote, puis reste
allumé).
4.
Entrez le code à l'aide des
touches numérotées.
Une fois le code entré, le
VOYANT s'éteint. Si le code est
invalide, le VOYANT clignote.
Vérifiez la liste de codes et
recommencez.
5.
Pointez la télécommande en
direction du téléviseur et
appuyez sur la touche ON•OFF.
Le téléviseur devrait s'éteindre.
Note : Si le téléviseur ne réagit pas, essayez
tous les codes de la marque. Si les codes ne
fonctionnent pas, ou si votre marque ne figure
pas dans la liste, essayez la méthode de
recherche de code à la page 19.
6.
Le téléviseur allumé, appuyez
sur CH+ (CANAL HAUT).
Si le téléviseur réagit, la
programmation est terminée.
7.
Inscrivez votre code ici pour
référence ultérieure.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents