Mitsubishi Electric MELSEC-Q Series Programming Manual page 34

• LCPU
Item
Active block processing time coefficient
Inactive block processing time coefficient
Nonexistent block processing time coefficient
Active step processing time coefficient
Active transition processing time coefficient
Transition condition-
satisfied step processing
time coefficient
SFC end processing time
*1 The HOLD step includes all of the coil hold steps and operation hold steps (with or without transition check). The Normal step represents
steps other than the HOLD step.
3 SPECIFICATIONS
32
3.3 Processing Time
L02SCPU,
L02SCPU-P
12.7s
5.3s
0.9s
11.9s
3.4s
With HOLD step 86.7s
*1
designation
Normal step designation 106.9s
67.5s
L02CPU, L06CPU, L06CPU-P, L26CPU, L26CPU-P,
L02CPU-P L26CPU-BT, L26CPU-PBT
8.5s 7.0s
3.8s 3.4s
1.2s 0.6s
8.7s 6.4s
2.0s 1.6s
66.1s 42.7s
79.4s 52.0s
44.7s 26.9s