Special Register (Sd) List - Mitsubishi Electric MELSEC-Q Series Programming Manual

Melsap-l
Hide thumbs Also See for MELSEC-Q Series:
Table of Contents

Advertisement

Special Register (SD) List

The following table lists the special registers that can be used in the SFC programs.
Number
Name
SD90
Step transition
monitoring timer setting
value (Corresponding
to SM90)
SD91
Step transition
monitoring timer setting
value (Corresponding
to SM91)
SD92
Step transition
monitoring timer setting
value (Corresponding
to SM92)
SD93
Step transition
monitoring timer setting
value (Corresponding
to SM93)
SD94
Step transition
monitoring timer setting
value (Corresponding
to SM94)
SD95
Step transition
monitoring timer setting
value (Corresponding
to SM95)
SD96
Step transition
monitoring timer setting
value (Corresponding
to SM96)
SD97
Step transition
monitoring timer setting
value (Corresponding
to SM97)
SD98
Step transition
monitoring timer setting
value (Corresponding
to SM98)
SD99
Step transition
monitoring timer setting
value (Corresponding
to SM99)
SD329
Online change (inactive
block) target block
number
*1 Available with the Universal model QCPU other than the Q00UJCPU, Q00UCPU, Q01UCPU, and Q02UCPU, whose serial number (first
five digits) is "12052" or later. Available with the LCPU other than the L02SCPU, L02SCPU-P, L02CPU, and L02CPU-P, whose serial
number (first five digits) is "15102" or later.
Meaning
Explanation
Timer set value and F
• Set the set time of the step transition
No. at time-out
watchdog timer and the annunciator
No. (F No.) that will turn ON at time-out
of the watchdog timer.
• The timer starts when any of SM90 to
SM99 is turned ON during an active
step, and the set annunciator (F) turns
ON if the transition condition following
the corresponding step is not satisfied
within the timer time limit.
SFC block number
• While online change (inactive block) is
executed (SM329 is on.), this register
stores the target SFC block number.
• In other than the status above, this
register stores FFFFH.
Set by
Corresponding CPU
(When set)
(1)
U
S (Status
change)
Appendix 1 Special Relay and Special Register List
(2)
(3)
(4)
(5)
A
*1
APPENDICES
179

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec-l series

Table of Contents