Technical Data; Product Description And Specifications; Intended Use - Bosch GLM Professional 150 Original Instructions Manual

OBJ_BUCH-947-005.book Page 17 Wednesday, April 23, 2014 9:23 AM
 Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
 Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.

Technical Data

Digital Laser Measure
Article number
Optical sight
Measuring range
Measuring accuracy (typical)
Lowest indication unit
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam diameter (at 25 °C) approx.
– at 10 m distance
– at 150 m distance
Batteries
Rechargeable batteries
Battery live, approximately
– Individual measurements
– Continuous measurement
Weight according to EPTA-Procedure 01/2003
Dimensions
Degree of protection
A) The working range increases depending on how well the laser light is reflected from the surface of the target (scattered, not reflective) and with in-
creased brightness of the laser point to the ambient light intensity (interior spaces, twilight). In unfavourable conditions (e.g. when measuring out-
doors at intense sunlight), it may be necessary to use the target plate.
B) In unfavourable conditions (e.g. at intense sunlight or an insufficiently reflecting surface), the maximum deviation is ±20 mm per 150 m. In favour-
able conditions, a deviation influence of ±0.05 mm/m must be taken into account.
C) In the continuous measurement function, the maximum operating temperature is +40 °C.
D) Less measurements are possible when using 1.2 V rechargeable batteries than with 1.5 V batteries. The battery life listed refers to measurements
without display illumination and audio signal.
The measuring tool can be clearly identified with the serial number 20 on the type plate.
Bosch Power Tools
Product Description and Specifica-
tions
Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.

Intended Use

The measuring tool is intended for measuring distances,
lengths, heights, clearances, and for the calculation of areas
and volumes. The measuring tool is suitable for measuring in-
doors and outdoors.
GLM 150 Professional
3 601 K72 000
–
A)
0.05–150 m
B)
±1.0 mm
0.1 mm
C)
–10 °C...+50 °C
–20 °C...+70 °C
90 %
2
635 nm, <1 mW
6 mm
90 mm
4 x 1.5 V LR03 (AAA)
4 x 1.2 V HR03 (AAA)
D)
30000
D)
5 h
0.24 kg
66 x 120 x 37 mm
IP 54 (dust and splash water IP 54 (dust and splash water
protected)
English | 17
GLM 250 VF Professional
3 601 K72 100

A)
0.05–250 m
B)
±1.0 mm
0.1 mm
C)
–10 °C...+50 °C
–20 °C...+70 °C
90 %
2
635 nm, <1 mW
6 mm
90 mm
4 x 1.5 V LR03 (AAA)
4 x 1.2 V HR03 (AAA)
D)
30000
D)
5 h
0.24 kg
66 x 120 x 37 mm
protected)
1 609 92A 0KT | (23.4.14)