Table of Contents
Advertisement
6560.ENv1a_9355907.book Page 46 Friday, April 23, 2004 4:40 PM
Store the feature code
Before you can use Send my caller identity, you must store the feature code
for activating this feature. Once the code is stored in your phone, it is sent
automatically to the network when you select this option from your
phone menu.
1
From the menu, select Settings > Network services > Network
feature setting.
2
Enter the feature code from your service provider and select OK.
3
Select Send my caller identity > Yes.
Show or hide your number
From the menu, select Settings > Network services > Send my caller identity >
Yes or No.
• SELECT A PHONE NUMBER
Your service provider programs your phone number and system information into
your phone memory when your phone is first activated. Your phone can hold up
to three numbers. This means that your phone can be activated in three different
service areas. Each service area would assign a different phone number or account
to your phone.
You must select a phone number for your home system. Only one phone number
can be active at a time. If you travel outside your home system, you can choose
another number. One phone number is usually enough if your service provider has
service or roaming agreements for each area in which you wish to use your phone.
Contact your service provider for details.
You need at least one active number to make calls. You cannot change from one
phone number to another during a call.
Note: Phone number selection is a network dependent feature. Some
networks may not support more than one number. Contact your service
provider for availability and full details.
Select the phone number
1
From the menu, select Menu > Settings > Network services > Own
number selection.
2
Scroll to the phone number you want to use and press Select.
46
Copyright © 2003 Nokia
Advertisement
Table of Contents
