Yamaha Raptor 90 2017 Owner's Manual page 108

ECB00942
NOTICE
 Always keep the battery charged. Storing the
battery in a discharged state for an extended
period of time will cause permanent battery
damage.
 Do not store the battery in an excessively
cold or warm place [below freezing or above
30 °C (90 °F)].
To install the battery
1. Place the battery in its compartment.
2. Connect the positive battery lead first, then
connect the negative battery lead by installing
their bolt. NOTICE: When installing the bat-
8
tery, the main switch must be off, and the
positive lead must be connected before
the negative lead.
[ECB01111]
1
1. Positive battery lead (red)
2. Negative battery lead (black)
3. Hook the battery band.
4. Install the seat. (See page 4-13.)
TIP
 Make sure the positive and negative battery
leads are installed as shown.
 Fully charge the battery before installing it.
8-33
2