D-Link DVA-5592 User Manual page 18

Section 3 - Configuration
Show Password:
This option shows the password as you type it.
Select Enable to enable this feature. It is disabled by default.
Management
Frame Protection
Wi-Fi Protected Setup
WPS Enabled: Select Yes to enable Wi-Fi Protected Setup (WPS) as a quick-and-easy
way to setup an encrypted wireless network.
Configuration
Select a WPS configuration method. As of this writing, the firmware
Methods: only supports WPS Push Button for security reasons.
Wi-Fi Clients Access
Access Control You can choose to ACCEPT or DENY wireless access to specific MAC
List: addresses. Selecting ACCEPT will allow access only to those devices
you specify, while selecting DENY will block specified addresses.
Only one rule can be active at a time.
MAC Addresses:
Enter the MAC address of the client to which to apply your filter. Click
the "+" button to add additional fields, or click Reset to clear all fields.
Advanced This option allows you to configure advanced wireless settings. This
Configuration: section is for advanced users and network professionals only and
can be safely ignored by a majority of users.
Start WPS: Starts the WPS pairing process as though you had pressed the WPS
button on your router.
Click Apply to save your changes, or Close to return to the previous menu without
saving.
D-Link DVA-5592 User Manual
WiFi-2.1 (5 GHz) (Cont)
13