Safety Precautions - Mitsubishi Electric Procon A1M Installation Manual

1. Safety precautions

 Before installing the unit, make sure you read all the
"Safety precautions"
 The "Safety precautions" provide very important points
regarding safety. Make sure you follow them
Symbols used in the text
Warning:
Describes precautions that should be observed to prevent danger of injury or death to the user.
Caution:
Describes precautions that should be observed to prevent damage to the unit.
Warning:

Ask the dealer or an authorised technician to install the unit
- Improper installation by the user may result in electric shock, or fire

Use the specified cables for wiring. Make the connections securely so that any outside forces acting on the cables are
not applied to the terminals
- Inadequate connection and fastening may generate heat and cause a fire

Never repair the unit. If the controller must be repaired, consult the dealer
- If the unit is repaired improperly, electric shock, or fire may result

Have all electric work done by a licensed electrician according to "Electric Facility Engineering Standard", "Interior Wire
Regulations" and the instructions given in this manual and always use a special circuit
- If the power source capacity is inadequate or electric work is performed improperly, electric shock and fire may result

Keep the electric parts away from any water - washing water etc...
- Contact may result in electric shock, fire or smoke

To dispose of this product, consult your dealer
Caution:

Safely dispose of the packing materials
- Packing materials, such as nails and other metal or wooden parts, may cause stabs or other injuries
- Tear apart and throw away plastic packaging bags so that children will not play with them - If children play with a plastic bag
which has not been torn apart, they face the risk of suffocation
Page 4 of 12