Siemens SITRANS AS100 Operating Instructions Manual page 20

Mounting
Accessory Mounting
Extension Tab
Screw Sensor into threaded hole of tab,
and fasten onto device being monitored.
Note
• If welding, weld must be a continuous bead. Tacking does not provide sufficient
acoustical coupling.
• Do not arc weld on equipent connected to a SITRANS AS100. Remove the SITRANS
AS100 or disconnect electrically to avoid current flowing through the sensor.
• If gluing, use Loctite 326 adhesive, or equivalent. Follow manufacturer's instructions to
ensure proper adhesion.
18
Mounting Disc
Screw Sensor into disc, after welding or
bonding disc onto device being monitored.
Operating Instructions, 06/2016, A5E31952194-AB
SITRANS AS100