Radio Shack PRO-100 User Manual

PRO-100 Communications Headset
Your RadioShack PRO-100 Communications Headset
delivers a wide frequency response for impressive sound
in an extremely lightweight design. It is ideal for use with
CB radios, scanners, and shortwave radios. The adjust-
able headband accommodates any head size or shape
for a comfortable fit.
The frequency response is 20–18,000 Hz. The imped-
ance is 32 ohms 10%. The diameter of each speaker is
1 1 / inches.
2

FEATURES

High Energy Elements — deliver professional quality
sound in a lightweight package.
Volume Control — lets you set the sound level.
Closed Earcup Design — reduces ambient sound and
provides an acoustically isolated listening experience.
Foam-Filled Earcushions — let you listen in comfort.

OPERATION

1. Turn down the volume on your sound source.
2. Rotate the volume control on the left earpiece clock-
wise to its minimum position.
3. Plug the headset into a
Note: If you are connecting the headset to an audio
1
source that has a /
4
inch to 1 / -inch adapter.
4
4. Put on the headset and adjust the headband for a
comfortable fit.
Illust.
1 / -inch headphone jack.
8
-inch jack, use the supplied
Illust.
RadioShack is a registered trademark used by Tandy Corporation.
5. Set the sound source's volume to a mid-range level.
Then adjust the volume control on the left earpiece
until you reach a comfortable listening level.

Listening Safely

To protect your hearing, follow these guidelines when you
use this headset.
• Set the volume to the lowest setting before you begin
listening. After you begin listening, adjust the volume
to a comfortable level.
• Do not listen at extremely high volume levels.
Extended high-volume listening can lead to perma-
nent hearing loss.
• Once you set the volume, do not increase it. Over
time, your ears adapt to the volume level, so a vol-
ume level that does not cause discomfort might still
damage your hearing.

Traffic Safety

Do not wear this headset while operating a motor vehicle
or riding a bicycle. This can create a traffic hazard and
could be illegal in some areas.

CARE

To enjoy your RadioShack PRO-100 Communications
Headset for a long time:
• Keep the headset dry. If it gets wet, wipe it dry imme-
diately.
• Use and store the headset only in normal tempera-
ture environments.
• Handle the headset gently and carefully. Don't drop it.
• Keep the headset away from dust and dirt.
• Wipe the headset with a damp cloth occasionally to
1
/ -
8
keep it looking new.
Modifying or tampering with the headset's internal com-
ponents can cause a malfunction and might invalidate its
warranty. If your headset is not performing as it should,
take it to your local RadioShack store for assistance.
© 1997 Tandy Corporation.
All Rights Reserved.
Cat. No. 20-282