Download Print this page

Setting Up And Connecting; Energy-Efficient Cooking - Silvercrest SDK 2500 A1 Operating Instructions Manual

Dual hotplate
Hide thumbs


Table of Contents
Never leave the appliance unattended while it is being used.
When the appliance is in use ensure that there are no easily inflammable
materials close to it (e.g. dishcloths, oven cloths etc.).
If you do not intend to use the appliance for an extended period, you must
disconnect it from the power source. The appliance is only completely with-
out current when the power plug has been pulled out of the socket.

Setting up and connecting

Energy-efficient cooking
1) Place the appliance on a stable, level and heat-resistant surface.
2) Insert the plug into a mains power socket.
3) Switch the appliance on by switching the On/Off switch
4) Switch both hobs
utes without a saucepan.
This can cause slight smoke development since the protective coating which has
been applied will burn in. Ensure there is sufficient ventilation. For example, open
a window.
5) Switch off the hobs
Use cooking pots with the same diameter as the respective hob
particularly small pots that do not cover the whole hob
energy is simply wasted.
Ensure that the pots/pans rest flat on the hobs
prevent optimum heat conduction.
To save energy, you can turn off the hob
finished cooking. The residual heat of the hob
cooking the food.
to MAX and allow these to heat up for around 3 min-
after 3 minutes.
to the position "I".
/ . If you use
/ , a great deal of
/ . Dented or uneven bottoms
before you have completely
is usually sufficient to finish
SDK 2500 A1



Table of Contents

This manual is also suitable for: