Installation: Pointek Cls200 Standard; Location; Mounting - Siemens Pointek CLS200 Operating Instructions Manual

Installation: Pointek CLS200 Standard

Notes:
• Installation shall only be performed by qualified personnel and in accordance with
local governing regulations.
• This product is susceptible to electrostatic shock. Follow proper grounding
procedures.
• The housing may only be opened for maintenance, local operation, or electrical
installation.
• Before installing the instrument, verify that the environment complies with any
restrictions specified on the product nameplate.

Location

Recommended:
• Provide a sun shield to protect the transmitter from direct heat radiation.
Precautions:
• Avoid mounting Pointek CLS200 in locations subject to strong vibrations in the
vicinity, whenever possible.
• Do not exceed the permissible ambient temperature limits (see
page 9 for details).

Mounting

Pointek CLS200 (compact threaded probe shown )
High level alarm
vertical
normal process
level
For high level alarm (level exceeds normal process level):
• normally mounted into the vessel top, or
• mounted through the tank wall at the detection level
For low level alarm (level drops below normal process level):
• mounted through the tank wall at the detection level
Page 12 Pointek CLS200/300 Standard – INSTRUCTION MANUAL
Environmental
Low level alarm
normal process
level
horizontal
7ML19985JH01
on