Wildview STC-TGL2M User Manual page 20

Wildview Series
•
If your computer doesn't run automatically, please
click "Start" button and choose "Run", and then
browse the CD drive and click "Setup".
Viewing the images on your computer
•
Slide the power switch to OFF position.
•
To view the images simply plug one end of the USB
cable into an available USB port on your computer.
•
Plug the other end of USB cable into the camera.
The camera will automatically power ON. Front LCD
screen will show "USb"
•
At the same time, your computer will recognize the
camera as a mass storage device and will be found
under MY COMPUTER.
www.wildviewcam.com Toll Free 888-304-6125 20