Table of Contents
Advertisement
Call functions
Turn on the camera by pressing the OK key
twice.
2. Press the Options soft key and select the V-
Call.
3. Use the Options soft key to mute the Voice,
Camera (Video), Voice-Video all, or Keytone.
Note: The Video call service is a special feature of
the 3G (UMTS) network. You can make and
receive a video call when the 3G icon (
is displayed.
Receiving a video call
You can receive a video call the same as
receiving a normal call, except that you can see
the person on the screen. Use the Show me soft
key to show the image of yourself to the other
person.
See page 23 for details about answering a call.
30
Changing view options
You can change the screen mode for video calls
to PIP (Picture-in-Picture). In the PIP mode, the
display has a main and a sub-frame where you
can see yourself on the screen, as well as the
other person.
To change the screen mode during a video call,
press the View soft key until you see the desired
status. The following modes are available:
)
• See the other person only in the main frame
• See yourself only in the main frame
• See the other person in the main frame and
yourself in the sub-frame
• See yourself in the main frame and the other
person in the sub-frame
Turning your voice or video on or off
You can mute your voice or turn the video off
during a video call.
During a video call, press the Options soft key to
display the option list.
The following options are available:
Headset/Loud speaker: allows you to choose a
listening methed. You can choose either Headset
or Loud speaker. The default setting is Loud
speaker.
Mute camera: turns the camera off. The other
person can hear you, but cannot see you.
Mute voice: mutes your voice. The other person
can see you, but cannot hear you.
Mute camera & voice: mutes your voice and
turns the camera off. The other person cannot
hear or see you.
Mute key tone: mutes your key tones.
Quality control: allows you to adjust the image
quality: Normal, Macro, or Motion. Macro
emphasises the picture quality and Motion
emphasises the frame count.
Zoom: allows you to adjust the zoom ratio of the
video camera.
Show (Hide) brightness: displays or hides the
brightness control bar.
Effects: allows you to change the colour tone of
the picture. Sepia, Black&White, Night, and
Normal are available.
Show (Hide) information: shows or hides the
information bar on the screen which contains
Call functions
information such as caller ID. This option is
preset at the factory to hide so that Show
information displays unless you change it.
End call: ends the video call.
Using the headset
With the Headset, you can make or answer a call
without holding the phone.
When you connect the Headset to the jack on the
left side of the phone, the button on the Headset
works as listed below:
To
Press
redial the last call
the button twice in idle
mode.
answer a call
and hold the button
when you receive the
call.
end a call
and hold the button
when you have finished
the call.
31
Advertisement
Table of Contents
