VerizonN330.book Page 11 Thursday, July 7, 2005 2:21 PM
Clear key
The CLR key (
the display. You can also use
menu or to return to standby mode from any menu.
•
If you enter an incorrect character, briefly press
backspace and delete.
•
To erase all digits or characters from the display screen,
press and hold
•
To back up one menu level, briefly press
•
To return to standby mode from any menu, press and
hold
until you return to standby mode.
Microphone
The microphone, located just
beneath
on the keypad, is used
for conversation, voice setup, and
recording voice memos.
Headset connector
The headset connector is the input jack for the optional
hands-free headset. The headset includes an earbud and
microphone in a convenient, lightweight unit so you can talk
without using your hands.
•
Before connecting the headset, gently pry open the input
jack cover to expose the connector inside.
Speaker
The speaker, located on the front of
your phone, plays audible sounds
such as ring tones and alerts.
) is used to erase or clear numbers from
to return to a previous
.
Understand your phone
.
Microphone
Speaker
to
11