Using The Phone; Making A Call; Speed Dial Calling; Answering A Call - Motorola L601N User Manual

Doc Title : User's Guide
Model : Motorola L60XN
Cordless handset LCD display icons
Full battery power level.
2/3 battery power level.
1/3 battery power level.
Flashes when low battery level is detected and the handset needs to be charged.
Internal bars cycling indicates the battery is charging.
The speakerphone is in use.
The handset ringer is turned off.
There are new voicemail received from the telephone service provider.
The ECO mode activates automatically to reduce power consumption when the handset is within range from the
ECO
telephone base.
On when a new call has been received.
NEW
3

USING THE PHONE

3.1 Making a call

1. Enter the phone number and then press <TALK/FLASH> or <SPEAKER> to dial the phone number.

3.2 Speed dial calling

1. In idle mode, press and hold a key from <1> to <9> until the number is displayed and dialed.

3.3 Answering a call

1. Press <TALK/FLASH> or <SPEAKER> to answer the incoming home call.

3.4 Ending a call

1. During a home call, press <TALK/FLASH> or put the cordless handset on the charger.

3.5 Adjusting volume

1. During a call, press <VOL+> or <VOL-> to adjust the volume.

3.6 Muting a call

1. During a call, press <MUTE> to mute the microphone and "Muted" will be displayed on the screen. You can
talk to someone else in the room without your caller hearing you.
2. Press <MUTE> again to resume the microphone.

3.7 Dialing from the redial list

1. Press <REDIAL/PAUSE> and then <VOL+> or <VOL-> to scroll and select the entry you want to redial.
2. Press <TALK/FLASH> or <SPEAKER> to dial the number.

3.8 Dialing from the calls list

1. Press <VOL-/CID> and then <VOL+> or <VOL-> to scroll and select the entry you want to dial.
2. Press <#/QUIET/FORMAT> to toggle the format of the dialing number.
3. Press <TALK/FLASH> or <SPEAKER> to dial the number.

3.9 Adding an entry to the directory

1. Press <DIRECTORY>.
2. Press <MENU/SELECT> and then <VOL+> or <VOL-> to scroll and select Add contact.
3. Press <MENU/SELECT> and then enter the name.
4. Press <MENU/SELECT> and then enter the number.
5. Press <MENU/SELECT> to save the entry.
NOTE
․
Numbers can be up to 24 digits long and names up to 16 characters long. Entries are stored in alphabetical
order.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
1.0
11 of 21