The 32" and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right or
90 degrees left and right.
When installing the stand, use the provided components and parts.
Tight the bottom screw first, and upper screw last.
✎ Progress the assembly of screw in the manual's order.
• Make sure to distinguish between the front and back of each component when assembling them.
• Make sure that at least two persons lift and move the TV.
Installing the LED TV Stand
(M4 x L12)
x4 (M4 x L12)
✎ Place a soft cloth over the table to protect the TV, and then
place the TV on the cloth screen-side down.
✎ Insert the Stand Guide into the slot on the bottom of the TV.
✎ Slide and assemble it to the end line in the direction of arrow.
When the declination happened, try reassemble it
✎ Make sure to assembling stand guide attached on the TV.
BN96-29120C (8EA: M4 x L12)
BN96-32463K (8EA: M4 x L12)