Samsung HG55AF690U Installation Manual page 32

Hotel TV Function
Category
HMS Mode
HMS Server URL
Setting
HMS
HMS Gateway Role
HMS HalfTicker Display
Virtual Standby Mode
Virtual
Standby
Reboot Time
Room Number Room Number
✎ Refer to the manual of each solution for details about functions and settings of the solutions such as REACH, HMS,
and H.Browser.
✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
through RF/IP DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only
in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
32
English
Item
You can turn on or off the HMS Mode. When set to On, the TV can operate with the HMS Server
through the IP network.
You can enter the HMS Server's address. (Example: http://192.168.1.2:8080)
When there is one TV per room, set to 'Master'.
When there are more than one TVs per room, set the main TV to 'Master' and the others to
'Slave'.
Set to On if you want to use the HalfTicker UI.
When set to Off, the HalfTicker UI will not be displayed. However, all the hot keys (except for
Room Control key) on the HMS remote control will work normally without the HalfTicker UI
display.
When the AC power cord is plugged in and the power is off, this option maintains the TV's
important features even after the screen is off.
When the TV is in Virtual Standby Mode, it consumes about 9.5 W to 17.4 W.
After the TV power is off (in Virtual Standby Mode) if there is no input from the user within the
set Reboot Time, the TV will reboot and enter Virtual Standby Mode again.
You can set the room number of the TV's location.
Description