Download  Print this page

For Use In Hazardous Zone 2 Or Zone 22 - Siemens 1LA8 Operating & Installation Instructions Manual

Low-voltage motor simotics tn series n-compact.
Hide thumbs

Advertisement

Safety information

2.5 For use in hazardous Zone 2 or Zone 22

Flammable substances
Chemical substances required for the setup, operation and maintenance of machines may
be flammable.
Burns and other damage to health and material may result.
● Read the information in these operating instructions and the product information supplied
● Observe the relevant safety regulations and wear the personal protective equipment
Noise emissions
During operation, the machine's noise emission levels can exceed those permitted at the
workplace, which can cause hearing damage.
Take steps to reduce noise, such as introducing covers and protective insulation or adopting
hearing protection measures, so that the machine can be operated safely within your system.
2.5
For use in hazardous Zone 2 or Zone 22
Electrical systems in hazardous areas must be assembled, installed, and operated by the
applicable responsible persons in accordance with the applicable rules and regulations.
Note
The basic requirements relating to electrical systems and their operation in hazardous areas
are described, for instance, in EU Directive 1999/92/EC as well as in IEC / EN 60079-14.
Ignition hazards
The operating company – together with the responsible authorities – must fully evaluate the
operational risks, the local operating conditions and the monitoring methods that are required.
It is essential that the operating company complies with the necessary measures. Regarding
this topic, the machine manufacturer cannot provide any generally applicable
recommendations. Please observe the information in these operating instructions.
Note
The basic requirements relating to the assessment of ignition hazards arising from electrical
equipment and their operation in hazardous zones are specified, for instance, in directives
2014/34/EU (" Explosion protection directive") and 1999/92/EC - as well as in the
IEC / EN 60079 series of standards.
18
CAUTION
by the manufacturer.
specified.
WARNING
SIMOTICS TN Series N-compact 1LA8
Operating Instructions 08/2017

Advertisement

   Related Manuals for Siemens 1LA8

Comments to this Manuals

Symbols: 0
Latest comments: