In addition to the exact part designation, please specify the machine type and serial number
in all orders for spare parts. Ensure that the spare part designation matches that on the spare
parts list and make sure you use the appropriate part number as well.
● Bearing shield, drive end (Part 5.00)
● Machine type
● Serial number
The machine type and serial number can be found on the rating plate. The serial number is
also stamped on the end face of the shaft extension at the drive end.
The graphical representations in this chapter show schematic diagrams of the basic versions.
They are used for spare parts definitions. The supplied version may differ in details from these
Risk of explosion
If you use parts other than the original spare parts, the type of protection can no longer be
guaranteed. This can result in an explosion during operation in a potentially explosive
gaseous atmosphere. This can result in death, serious injury or material damage.
● Use only original spare parts for explosion-proof machines; this also applies to
● Commercially available equivalent standard parts such as screws may be used.
Ordering spare parts via the Internet
You can use "Spares on Web" to determine the order numbers for motor spare parts quickly
Spares on Web (https://www.automation.siemens.com/sow).
SIMOTICS TN Series N-compact 1LA8
Operating Instructions 08/2017
components such as seals, terminals, cables and cable entries. Should you have any
questions, please contact the Service Center (Page 149).