GE B90 Instruction Manual page 277
Ur series low impedance bus differential
system
Hide thumbs
Also See for B90:
- Instruction manual (510 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (442 pages)
Table of Contents
Advertisement
8 SECURITY
By default, all settings are specified as locked and displayed against a grey background. The icon on the upper right of
the settings window will also indicate that EnerVista UR Setup is in EDIT mode. The following example shows the
phase time overcurrent settings window in edit mode.
Figure 8–2: SETTINGS TEMPLATE VIEW, ALL SETTINGS SPECIFIED AS LOCKED
5.
Specify which settings to make viewable by clicking on them.
The setting available to view will be displayed against a yellow background as shown below.
Figure 8–3: SETTINGS TEMPLATE VIEW, TWO SETTINGS SPECIFIED AS EDITABLE
6.
Click on Save to save changes to the settings template.
7.
Proceed through the settings tree to specify all viewable settings.
c) ADDING PASSWORD PROTECTION TO A TEMPLATE
It is highly recommended that templates be saved with password protection to maximize security.
The following procedure describes how to add password protection to a settings file template.
1.
Select a settings file from the offline window on the left of the EnerVista UR Setup main screen.
2.
Selecting the Template Mode > Password Protect Template option.
GE Multilin
B90 Low Impedance Bus Differential System
8.2 SETTINGS SECURITY
8-7
8
Advertisement
Table of Contents
