GE B30 Instruction Manual page 20

1.3 ENERVISTA UR SETUP SOFTWARE
Next, use an Ethernet cross-over cable to connect the computer to the rear Ethernet port. In case you need it, the figure
1
shows the pinout for an Ethernet cross-over cable.
3 4 5 6
2
1
Now, assign the computer an IP address compatible with the relay's IP address.
1. From the Windows desktop, right-click the My Network Places icon and select Properties to open the network con-
nections window.
2. Right-click the Local Area Connection icon and select Properties.
1-10
END 1
7
Pin Wire color
8
1 White/orange
2 Orange
3 White/green
4 Blue
5 White/blue
6 Green
7 White/brown
8 Brown
FIGURE 1–8: ETHERNET CROSS-OVER CABLE PIN LAYOUT
B30 Bus Differential System
END 2
Diagram Pin Wire color
1 White/green
2 Green
3 White/orange
4 Blue
5 White/blue
6 Orange
7 White/brown
8 Brown
1 GETTING STARTED
Diagram
842799A1.CDR
GE Multilin