Siemens E71 User Manual page 74

Table of Contents

Advertisement

74
Settings
EGPRS (EDGE)
Activate/deactivate EGPRS.
ì
EGPRS is a method for transmitting da-
ta in the mobile network faster than
with GPRS. Use EGPRS and if the net-
work has sufficient capacity, you can be
connected to the Internet permanently.
Only the actual transmission time is
charged by the network operator. Some
service providers do not yet support this
service.
Shown in the display:
Activated
£
EGPRS info
The amount of data that has been trans-
ferred via GPRS is displayed.
Online settings
Default setting and activation of
the connection profiles for data
transmission.
The phone default setting varies from
service provider to service provider:
• The settings have already been imple-
mented by the service provider.
You can start immediately.
• Access profiles have already been
created by your service provider.
Then select profile and activate.
• The access profiles must be config-
ured manually. In this case, you can
obtain the necessary data from the
service provider or visit:
www.BenQMobile.com/
customercare
Selecting profile.
Select the profile.
I
Confirm selection.
ì
Fax/data
Send voice/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Receive fax
Your service provider has given
you a number for telephoning and a fax
number.
The call is signalled by a special ringtone
and the type of call is displayed. Now
start the communication program in
your PC to receive the fax.
b
b

Advertisement

Table of Contents
loading

Table of Contents