Download Print this page

Radio Shack LIFEWISE 63-1515 User Manual

Wrist cuff blood pressure monitor

Advertisement

Quick Links

Wrist Cuff Blood
Pressure Monitor
63-1515
Step One
Install Batteries
1. Remove the battery compartment cover.
2. Insert two AAA batteries as indicated by
the polarity symbols. For easy removal,
place the ribbon under both batteries.
3. Replace the cover.
When the display dims or batteries weaken,
Áappears on the display. Replace the batter-
ies.
Step Two
Setting the Date and Time
1. Press
. The month digit flashes.
MODE
2. Repeatedly press (or hold down)
the correct month.
3. Repeat Steps 1 and 2 to set the date, hour,
and minute. Press
when finished.
MODE
What's Included
Wrist Cuff
Storage Case
Monitor
Step Three
Attaching the Pressure Cuff
1. With your palm face up, wrap the pressure cuff snugly around
your wrist, leaving about
clearance between the wrist and the cuff.
2. Place your elbow on the table and wrist against the armrest or
the storage case so the pressure cuff is at the same height as
your heart.
to set
SET
/
inches to
/
inches (0.5 to 1 cm)
3
13
16
32
Step Four
Measuring Blood Pressure
1. Press
. All display segments
START/STOP
appear briefly, the systolic rate rests to
and  appears. The pressure cuff
automatically inflates to 195 mmHg or the
sufficient pressure level for measurement.
The systolic rate varies, and
the same rate as your heartbeat.
2. Once the monitor detects your blood
pressure reading, the pressure cuff deflates
slowly. Your blood pressure reading and
pulse rate appear.
3. To stop measurement, press
START/STOP
à appears for about five seconds when:
The pressure cuff is not wrapped around your wrist
correctly.
You move or talk during measurement.
You do not have correct posture.
Step Five
Recalling Stored Readings
1. Press
. The last reading with the
RECALL
date and time appears.
2. Repeatedly press (or hold down)
to view other stored readings (up to 48).
3. To view current date and time, repeatedly
press or hold down
until the current
RECALL
date and time appear.
4. To erase all stored readings, remove and
reinstall the batteries.
,
00
flashes at
.
RECALL

Advertisement

loading

Summary of Contents for Radio Shack LIFEWISE 63-1515

  • Page 1 Wrist Cuff Blood Pressure Monitor 63-1515 Step One Install Batteries 1. Remove the battery compartment cover. 2. Insert two AAA batteries as indicated by the polarity symbols. For easy removal, place the ribbon under both batteries. 3. Replace the cover. When the display dims or batteries weaken, Áappears on the display.
  • Page 2: Specifications

    Care stethoscope auscultation method by a physician or a trained health Keep the blood pressure monitor dry; if it gets wet, wipe it dry professional. immediately. Use and store the blood pressure monitor only in nor- • Keep radio transmitting equipment or cellular mal temperature environments.