Summary of Contents for Rackmount CV-1602
- Page 1 1-866-207-6631 sales@rackmountsolutions.net 2 Console DB-15 KVM User Manual CV-802 / CV-1602...
-
Page 2: Installation
CV-802 / CV-1602 Two Console DB-15 KVM Installation Figure 1. Installing the bracket to the KVM. Figure 2. Fixing the KVM into the rack. screw A: M3.2 x 4.5 mm screw B: M4 x 10 mm ■ Install each bracket using screws pro- vided shown in Figure 1. -
Page 3: Package Content
Package Content (only for rackmount KVM) KVM switch x 1 pc Screw M3.2 x 4.5mm x 4 pcs Screw M4 x 10mm x 8 pcs Bracket x 1 set Receiver x 1 pc User manual x 1 pc Power adapter x 2 pcs (12V DC for KVM switch ; 9V DC for receiver) CB-6 2-in-1 USB KVM cable (for receiver) x 1 pc... - Page 4 Two Console DB-15 KVM Connection CV-802 Local Console Remote Power console Input CV-1602 Connection Rackmount KVM Receiver Cat5 cable (up to 1,000 ft) Connection KVM modules Receiver Cat5 cable (up to 1,000 ft) Cascade back CD-6 KVM cable CD-6 KVM cable...
-
Page 5: Receiver Connection
CV-802 / CV-1602 Two Console DB-15 KVM Receiver Receiver Box Front View Rear View Console Console 9VDC Local Computer Remote LEDs Select Keyboard Mouse Receiver Connection CV-802 / CV-1602 9V DC Power Adapter Monitor Cat5 cable (up to 1,000 ft) - Page 6 Cascaded KVM ( Bank 2 to 8 ) must be single console USB KVM - CV-S801 / CV-S1601 ■ With the CV-802 cascade up to 120 servers. With the CV-1602 cascade up to 128 servers. ■ Cascading multiple KVM by CBC-6 cable...
- Page 7 Power ON ■ Turn off all servers and KVM switches ■ Make sure all cables / connectors are properly connected ■ Recommend Power ON sequence is monitor, KVM switch fi nally computer Front Panel - Port LED Indications 8 ports Online Channel 16 ports Online Channel...
- Page 8 Password Password for CV-802 / CV-1602 The password is disabled by default (i.e. There is no password required when you power on the KVM switch for the first time) ■ Enable password Press the KVM hotkey Logout the KVM by pressing the hotkey In SUPERVISOR level, enter “00000000”...
-
Page 9: Osd Operation
OSD Menu OSD operation next to the system name next to the system name Enter PgUp/PgDn 1 / 2 / 3 / 4 F1 Main Menu The PC is powered on The PC is selected Access F1 MAIN MENU Logout the OSD menu Previous menu Cancel / Quit Complete / Switch to selected port... -
Page 10: Kvm Hotkey
KVM Hotkey Local Console Hotkey for CV-802 / CV-1602 Hotkey Scroll Lock + Scroll Lock + Space Bar Right-button mouse + Esc Scroll Lock + Scroll Lock + Scroll Lock + Scroll Lock + Scroll Lock + Scroll Lock +... -
Page 11: Optional Accessories
Optional Accessories 1. PS/2 3-in-1 KVM cable 1.1 CD-6 6 feet 1.2 CD-10 10 feet 1.3 CD-15 15 feet 1.4 CD-33 33 feet 2. USB KVM cascade cable 2.1 CBC-6 6 feet 3. SUN / iMAC USB to PS/2 adapter 3.1 SUN-31 kit 5. -
Page 12: Dc Power 12V, 24V, 48V Input
DC Power 12V, 24V, 48V Input Input rating Input current l l u Output rating Ef? ciency Remarks: ■ Package does not include power cord... -
Page 13: Specification
58~100Hz / 0.98G (11ms / cycle) 443 x 180 x 44 mm / 17.3 x 7.1 x 1.73 inch CV-802 / CV-1602 : 4 kg / 9 lb 510 x 400 x 77 mm / 20.1 x 15.7 x 3 inch... - Page 14 General How do the KVM switches allow the user to switch ports? There are two ways to switch ports. One is the membrane buttons on the front and the other way is with Hot-key commands. What operating systems do the KVMs support? The KVMs support multi-platform support allows you to control Windows-based computers, Sun So- laris systems, Linux, or even Macs by a single KVM switch.
- Page 15 The server VGA resolution does not match the resolution of monitor ? The KVM supports DDC function which will dynamically detect and the DDC data. The problem may come from the power on sequence. For KVM switch The recommended power on sequence is - monitor, KVM switch and then servers. For remote console box It supports DDC function but does not support hot-plug, the recommend power on se quence is –...
-
Page 16: Troubleshooting
Troubleshooting There is no LED display on KVM membrane switch Make sure the power adapter plugged into the KVM Switch, if the LED’s still off, perform soft reset to KVM switch. Power cycle KVM switch. I can power on the KVM, but I am not getting any picture at all, how can I solve this? Switching to another port and checking if this port has the same problem If you switch to another port, please check the screen resolution is the same.