Download  Print this page

Alarm Limits - Philips FM20 Configuration Manual

Avalon fetal monitor, for monitor release j.3 with software revision j.3x.xx, patient monitoring.
Hide thumbs

Advertisement

Standby Brightn.
The
Standby Brightn.
For
Standby Brightn.
TransportBrightn
The
TransportBrightn
FM20, FM30
power. For
with #25 only
Display Units
If
Display Units
provided that there is enough space.

Alarm Limits

If
Alarm Limits
that there is enough space.
Measurement Time
If
Measurement Time
of the most recent measurement. If set to
Sequence
, the time until the next automatic measurement is shown, along with a graphic representation
of the remaining time.
NOTE
If the numeric area on the monitor screen is configured large enough, the
Next
without the time.
This setting is also accessible in
NBP Sys/Dia only
Use the
NBP Sys/Dia Only
are:
for systolic/diastolic, e.g. 120/80
Yes
for systolic/diastolic (mean), e.g. 120/80 (95)
No
Wave Line Style
The
Wave Line Style
distance you might want to use
Thin
Medium
Thick
Extra Thick
setting lets you choose a brightness setting for when the monitor is in Standby.
, the choice
Optimum
setting defines the display brightness when the monitor is running on battery
TransportBrightn
, the choice
is set to
Yes
, the measurement units are displayed next to the measurement numerics,
is set to
, the alarm limits are displayed next to the measurement numerics, provided
Yes
is set to
Timestamp
will be displayed in the NBP segment. If this area is too small, the numeric may be shown
setting to define how the NBP values are presented on the Screen. Choices
setting lets you configure the thickness of all waves. For better visibility over a
Medium
is equivalent to
.
1
Optimum
is equivalent to
, the time shown beside the numeric will show the time stamp
, and, mode of a measurement is set to
Time to Next
>
Main Setup
Measurements
or
Thick
. The choices are:
6 Monitor Settings
4
.
or
Timestamp
>
>
NBP
Measurement Times
or
Auto
Time to
.
61

Advertisement

Table of Contents

This manual is also suitable for:

Fm30Fm40Fm50

Comments to this Manuals

Symbols: 0
Latest comments: