Download  Print this page

Configuring Pulse (toco) - Philips FM20 Configuration Manual

Avalon fetal monitor, for monitor release j.3 with software revision j.3x.xx, patient monitoring.
Hide thumbs

Advertisement

Configuring Pulse (Toco)

Measurement Settings: Main Setup
Pulse (Toco) Factory Default Settings
Setting Item
Measurement
Trace
"No MP" Warning
Color
Pulse (Toco) Configuration Implications
Measurement
The maternal pulse of a Toco MP transducer can be disabled to make it behave like a "Toco"
transducer without MP capability.
"No MP" Warning
It can be configured whether a persistent warning message should be displayed every time a Toco
transducer without MP capability is connected to the monitor. Use the
switch this warning
Color
Use the
Color
>
Measurements
Mode
Factory Default
C
Enabled
C, M
This setting is stored as a monitor setting, see "Trace" on page 68.
C
On
C
Green
On
and
Off
.
setting to define the
Pulse (Toco)
5 Measurement Settings
>
Pulse (Toco)
Choice/Range
Enabled, Disabled
On, Off
Red, Green, Yellow, Blue, Magenta, Cyan,
White, Pink, Orange, Light Green, Light Red
"No MP" Warning
color.
setting to
31

Advertisement

Table of Contents

   Also See for Philips FM20

   Related Manuals for Philips FM20

This manual is also suitable for:

Fm30Fm40Fm50

Comments to this Manuals

Symbols: 0
Latest comments: