Pliance - Electrolux Iron Aid EDI97170W User Manual

Caution! Important: During the steam
phases that form part of the Iron Aid
programme and also the anti-crease
phase (represented by animated
clouds of steam in the display), the
loading door cannot be opened. Risk
of burns!
If the water tank indicator lights up
when you select an Iron Aid programme,
the programme cannot be started. You will
need to fill the water tank first (see section
on 'Cleaning and maintenance,filling water
tank'.)
It is normal for the appliance to make
noises during an Iron Aid or drying pro-
gramme if garments with hard parts,
such as metal buttons, are put in the
drum.
Changing a programme
To change a programme which has been se-
lected by mistake once the programme has
started, first turn the programme selector to
O OFF and then reset the programme.
The programme can no longer be
changed directly once the programme
has started. If you nevertheless attempt
to change the programme with the pro-
gramme knob or an additional function
button (except the BUZZER button),
the START/PAUSE button and
will flash in the display. The drying pro-
gramme is not however affected by this.
Putting in extra items or taking items out be-
fore end of programme
1. Open door.
2. Load or remove laundry items.
3. Close door securely.
4. Press the START/PAUSE button to con-
tinue the drying cycle.
Iron Aid programme complete /
removing laundry
After the Iron Aid phase has ended,
is illuminated and the icon
TICREASE appears in the display. If the
BUZZER has been activated, an audible sig-
nal sounds at regular intervals.
The Iron Aid programme is automatical-
ly followed by an anti-crease phase, in-
cluding brief steam phases, which lasts
around 90 minutes.
The drum rotates during the anti-crease
phase. This keeps the laundry loose and
free of creases. It can be removed at any
point during the anti-crease phase, except
during steam phases (look for steam anima-
tion in the display!). Laundry should be re-
moved as quickly as possible.
1. Open the loading door to remove the
laundry.
2. Before removing the laundry, remove
fluff from the micro-fine filter. It is best to
use a damp hand for this purpose. (See
"Cleaning and maintenance" section.)
3. Remove laundry one garment at a time.
4. Turn the programme knob to O OFF .
Important! After each drying cycle
– Clean the micro-fine filter and fine filter
– Drain the condensed water container
(See section "Cleaning and mainte-
nance".)
5. Close door.
Caution! To retain the effects of the
Iron Aid treatment, clothes must be re-
moved one garment at a time during
the anticrease phase and hung immedi-
ately on a clothes hanger to dry (for at
least 5-15 mins, depending on fabric
and selected steam level). Do up the
buttons and tug the garment into
shape, paying particular attention to
cuffs and seams.
AN-
electrolux 13