Table of Contents
Advertisement
Commissioning
7.2 Testing the securing and alignment
● The rotor can spin without coming into contact with the stator.
● The bearing insulation is not bridged.
● Appropriately configured control and speed monitoring functions ensure that the the
● Any supplementary motor monitoring devices and equipment have been correctly
Electrical connection
● The grounding and equipotential bonding connections have been made correctly.
● The machine is connected so that it rotates in the direction specified.
● Appropriately configured control and speed monitoring functions ensure that the motor
● The minimum insulation resistance values are within tolerance.
● Minimum air clearances have been maintained.
● Any supplementary motor monitoring devices and equipment have been correctly
● All brakes and backstops are operating correctly.
● At the monitoring devices, the values for "Warning" and "Shutdown" are set.
Converter operation
● If the design of the motor requires connection to a particular converter type, the rating plate
● The converter is correctly parameterized. The parameterization data is specified on the
● Any supplementary motor monitoring devices and equipment have been correctly
● In continuous operation, the motor cannot exceed the specified upper speed limit n
● The permissible acceleration time to the limit speed n
62
permissible speeds specified on the rating plate cannot be exceeded.
connected and are fully functional.
cannot exceed the permissible speeds specified in the technical data. For this purpose,
compare the data on the rating plate or, if necessary, the system-specific documentation.
connected and are functioning correctly.
will contain corresponding additional information.
rating plate of the machine. Information about the parameters is available in the operating
instructions for the converter.
connected and are functioning correctly.
undershoot the lower speed limit n
assignment.
.
min
depends on the parameter
min
or
max
SIMOTICS XP 1MD4/1MD5
Operating Instructions 05/2015
Advertisement
Table of Contents
