Paper Does Not Feed Properly/"No Paper" Error - Canon G3000 Series Online Manual

Paper Does Not Feed Properly/"No Paper" Error

Make sure paper is loaded.
Check1
Loading Paper
When loading paper, consider the following.
Check2
• When loading two or more sheets of paper, align the edges of the sheets before loading the paper.
• When loading two or more sheets of paper, make sure the paper stack does not exceed the paper load
limit.
However, paper may not feed correctly at the maximum capacity, depending on the type of paper or
environmental conditions (very high or low temperature and humidity). In such cases, reduce the amount of
paper you load at a time to less than half of the paper load limit.
• Always load the paper in portrait orientation, regardless of the printing orientation.
• When you load the paper, place the print side facing UP and slide the paper guides to align with both sides
of the paper.
Loading Paper
Is paper too thick or curled?
Check3
Media Types You Cannot Use
When loading envelopes, consider the following:
Check4
When printing on envelopes, see
Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in
landscape orientation, they will not feed properly.
Make sure media type and paper size settings match with loaded paper.
Check5
Make sure there are not any foreign objects in rear tray.
Check6
Loading Paper, and prepare the envelopes before printing.
735