Transporting Your Printer - Canon G3000 Series Online Manual

Transporting Your Printer

When relocating the machine for changing your living place or repairing it, make sure of the following.
Important
• You cannot take ink out of ink tanks.
• Check if the tank cap is completely inserted. If the ink tank cover is not completely closed, insert the
tank cap properly.
• Do not tilt the machine. Ink may leak.
• Please handle with care and ensure the box remains flat and NOT turned upside down or on its side, as
the printer may be damaged and ink in the printer may leak.
• Pack the machine in a sturdy box so that it is placed with its bottom facing down, using sufficient
protective material to ensure safe transport.
• With the cartridge left installed in the machine, press the ON button to turn off the power. This allows
the machine to automatically cap the print head, thus preventing it from drying.
• Do not remove the cartridge. Ink may leak.
• When transporting the machine, pack the machine in a plastic bag so that ink does not leak.
• When a shipping agent is handling transport of the machine, have its box marked "THIS SIDE UP" to
keep the machine with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".
1. Make sure the machine is on.
2. Hold down the Stop button until the Alarm lamp flashes seven times, then release it
immediately.
The preparation to transport is executed and the machine goes off after the preparation is complete.
Do not perform any other operations until the machine completes the preparation.
3. Confirm that the ON lamp is off and
Important
• Do not unplug the machine while the ON lamp is lit or flashing, as it may cause malfunction or
damage to the machine, making the machine unable to print.
4. Retract the paper output tray and the output tray extension, then close the paper support.
unplug the power cord.
301