Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 43

Modbus communication
Hide thumbs Also See for MELSEC iQ-F FX5:
Table of Contents

Advertisement

Operation mode display
This device stores the operation mode of the serial communication being executed.
Only for FX5
CH1
CH2
CH3
SD8503
SD8513
SD8523
R: Read
Precautions
Do not change the device value using a program or an engineering tool.
The device is cleared when ADPRW instruction is executed.
Current retry value
This device stores the current retry value.
Only for FX5
CH1
CH2
CH3
SD8800
SD8810
SD8820
R: Read
Precautions
Do not change the device value using a program or an engineering tool.
The device is cleared when the power supply is turned from off to on, reset, set from STOP to RUN, SM50 (Error Detection
Reset Completion) is turned on, or next ADPRW instruction is executed.
Host station number
This device stores the host station number setting value.
Only for FX5
CH1
CH2
SD8861
SD8871
R: Read, R/W: Read/Write
*1 The devices vary depending on the Latch Setting. The device becomes R when the Latch setting is "Do not Latch", and R/W when the
Latch setting is "Latch".
Precautions
"Latch"
The device value can be changed by the program.
"Do Not latch"
Do not change the device value using a program or an engineering tool.
Change "Do Not Latch" to "Latch"
The setting value is reflected when the power supply is turned from off to on or reset, after parameter write from an
engineering tool.
For FX3 compatibility
CH4
CH1
CH2
SD8533
SD8419
SD8439
For FX3 compatibility
CH4
CH1
CH2
SD8830
SD8408
SD8428
CH3
CH4
SD8881
SD8891
Description
0: MELSOFT Connection or MC protocol
3: N:N Network Communication
5: Non-protocol Communication
6: Parallel Link Communication
7: Inverter Communication
9: MODBUS RTU Communication
12: Predefined protocol support
Other than above: Not used
Description
Stores the current value of retries executed by the slave
response timeout.
Description
Stores the parameters (host station number) set by a
program or an engineering tool.
For 0: Master station
For 1 to 247: Slave station (station number: 1 to 247)
R/W
R
R/W
R
R/W
*1
7 FUNCTION
41
7.3 Related Devices
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents