JVC LT-32E35B Instruction Manual page 59

No pictures when connecting HDMI
Picture appears in wrong ratio
The audio function does not work.
Picture OK but no sound
No output from one of the speakers
Unusual sound from inside the TV
No sound when connecting HDMI
Audio noise
Password
Lost password
Channels are not recording.
The PVR functions are not available
in every country
Not all channels record
FAQs (Frequently Asked Questions)
Why have I lost some / all of my
channels?
Why do I get 'blocking' on my digital
picture?
Can I watch free channels using a
portable set-top aerial?
What type of aerial do I need?
• Check if the input source is HDMI1 / HDMI2.
• Adjust the Aspect Ratio settings in the PICTURE menu or press the ASPECT button
on the remote control.
• Press the VOL + / – buttons.
• Sound muted? Press the
• Try another channel. The problem may be caused by the broadcaster.
• Adjust the Balance settings in the SOUND menu.
• A change in ambient humidity or temperature may result in an unusual noise when
the TV is switched on or off and does not indicate a fault with the TV.
• Check if the input source is HDMI1 / HDMI2.
• Keep the RF coaxial cable away from other connected cables.
• Select the Set Password setting in the LOCK menu, then enter the following master
password "9527". The master password clears your previous password and allows
you to enter a new password.
• PVR functions are not available in Finland.
• You can only record free to air channels.
• You may have you run out of space on your USB storage device. Delete some files or
use another USB storage device.
• It happens sometimes if you have a weak signal. Usually it just means you'll need to
re-scan your digital box or TV. Don't worry, it is easy to do. And once you've done it,
you should get all the free channels available to you. If problems persist you may
need to get your aerial checked. Talk to your retailer or contact your local aerial
installer.
• In most cases, blocking is caused by a reception problem – either the signal is too
weak or there is some kind of interference. Talk to your retailer or contact your local
aerial installer.
• Blocking can also be caused by a digital signal that is too strong. If you are still
experiencing blocking and the signal is strong, consult your local aerial installer for
advice.
• Some, but only a few, homes may be able to use a set top aerial. However, for a
much better reception, we strongly recommend that you use a rooftop aerial.
• If you do not have access to a rooftop aerial – for example, if you rent a flat and
the aerial is the responsibility of your landlord, or if you're using a second TV in
the bedroom and don't want the hassle and expense of using extension cables,
a set top aerial may be your only option.
• If you are installing a new aerial, we recommend a wideband rooftop aerial rather
than a loft aerial. Loft aerials generally receive a weaker digital signal and are more
likely to get interference from other electrical devices at home. We suggest you
have an aerial survey done before getting an aerial upgrade.
• Talk to your retailer or contact your local aerial installer.
Others Information
button.
9
GB
59