JVC KW-V40BT Instruction Manual page 47

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connecting a USB device/iPod/iPhone
iPod/iPhone except for
iPhone 5/iPod touch iPhone 5/iPod touch
(5th Generation)/iPod (5th Generation)/iPod
nano (7th Generation) nano (7th Generation)
(commercially available)
USB device
(commercially
available)
USB 2.0 cable
(accessory of the
iPod/iPhone)
KS-U59 (optional accessory)
Connecting external components
(commercially available)
1 AV-OUT/Video output (Yellow)
2 Rear view camera input (Yellow)
3 Audio Video input (AV-IN1)
• Connect the following type of 4-pole mini
plug:
1 3
24
4 Subwoofer preout (monaural output)
• Subwoofer left output (White)
• Subwoofer right output (Red)
5 Rear preout
• Audio left output (White)
• Audio right output (Red)
6 Front preout
• Audio left output (White)
• Audio right output (Red)
7 AV-OUT/Audio output (ø3.5 mini jack)*
Resistance-free stereo type mini plug
8 Steering wheel remote controller input
* Only for KW-V40BT.
1 Left audio
2 Right audio
3 Ground
4 Composite video
Connecting microphone for Bluetooth
(only for KW-V40BT/KW-V20BT)
Connect the microphone (5) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
5
ENGLISH 47