Other External Components; Using External Audio/Video Players-Av-In; Using External Audio Players-Front Aux (Only For Kw-V20Bt/Kw-V10) - JVC KW-V40BT Instruction Manual

OTHER EXTERNAL COMPONENTS

OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
• When the operation buttons
are not displayed on the screen,
touch the area shown on the
illustration.
– For KW-V10 : You can also
display/hide the operations
buttons by pressing FNC on the
monitor panel.
– To change settings for video
playback, see page 34.
You can connect an external component to the
AV-IN1 terminal. (Page 47)
Preparation:
Select [AV-IN] for <AV Input>. (Page 40)
• <AV Input> can be changed only when <Input>
in <Navigation Input> is set to [Off].
• For KW-V40BT : Make sure that "AV Off" is selected
as the rear source. (Page 24)
22
Indications and buttons on the source
control screen
1
Playback information
1 AV-IN name
Operation buttons
[Mode] Changes the AV-IN name.
• Press [H] or [I] to select an AV-IN
name.
[HOME] Displays the <HOME> screen.
Starting playback
1
Connect an external component to the
AV-IN1 terminal.
• To connect an external component, see
page 47.
2
Select "AV-IN" as the source. (Page 8)
3
Turn on the connected component and
start playing the source.
Using external audio players—
Front AUX
(only for KW-V20BT /KW-V10 )
Indications and buttons on the source
control screen
[HOME] Displays the <HOME> screen.
Starting playback
1
Connect an external component to the
AUX jack on the monitor panel.
• Use a 3.5 mm stereo mini plug (commercially
available).
2
Select "Front AUX" as the source.
(Page 8)
3
Turn on the connected component and
start playing the source.