Detect the paper width when printing from computer
When you print from the computer, this function identifies the paper that was loaded into this printer.
When the paper width detected by the printer differs from the width of the paper specified in Page
Size on the Page Setup tab, a message is displayed.
To use paper width detection when printing from the computer, select the check box.
• If you are using user-defined paper, use the Custom Paper Size to correctly set the size of the
paper loaded in the printer.
If an error message is displayed even though the same size that was set is loaded, clear the
Ink Drying Wait Time
The printer can pause before printing a subsequent page. Moving the slider to the right increases the
pause time, and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the printed page dries,
increase the ink drying wait time.
Reducing the ink drying wait time speeds up printing.
About dialog box
When you click About, the About dialog box is displayed.
This dialog box displays the version, copyright, and module list of the printer driver. You can select the
language to be used and switch the language displayed in the setup window.
Lists the printer driver modules.
Specifies the language you wish to use in the
• If the font for displaying the language of your choice is not installed in your system, the
characters will be garbled.
Cleaning the Print Heads
Aligning the Print Head Position
Printing a Nozzle Check Pattern
Setting the Ink Cartridge to be Used
Cleaning Inside the Printer
Cleaning the Paper Feed Rollers
Managing the Printer Power
Reducing the Printer Noise
Changing the Printer Operation Mode
printer driver setup